Tecta America Kentucky, LLC
4045 McCollum Court
Louisville, KY 40218
Tecta America Kentucky LLC, a division of Tecta America, chose SFS intec's isofast® for their Main Street Realty Tract 4 project, located in Shepherdsville, KY. SFS intec District Manager Jerry Justice, worked with the Tecta team to ensure that #15 x 4" belted Dekfast™ fasteners, insulation plates, seam plates and isofast® tools were delivered in advance of job start-up.
The scope of the project was to install 6,000 roofing squares of insulation and Firestone UltraPly™ TPO 60 mil membrane. Firestone Building Products ordered 159,000 fasteners, 99,750 insulation plates and 63,500 seam plates for this project.
Start-up for isofast® occurred on Friday October 18 with Jerry Justice and SFS intec District Manager Harley Coleman on site to train the Tecta employees, to use eight isofast® IF160 tools (4 insulation and 4 seam). The productivity goal for the day was to install 300 roofing squares of insulation and membrane. Success was achieved early as four roofers mastered insulation attachment with isofast®. Feedback from the crew was that normally eight to ten crew members would install insulation. With isofast®, the crew size was reduced to only four!
Tom Miller, president of Tecta America Kentucky visited the job site and learned that project manager Steve Golab and his crew exceeded the day's goal by installing 312 roofing squares. At the end of one day securing insulation and membrane, Anthony Bryant, superintendent, said, "Not only are we faster using the tools, but my guys can stand up straight leaving the job. And their backs are not killing them."
SFS intec is a global supply partner, manufacturer and supplier of precision cold formed components, special fasteners and mechanical fastening systems. With global headquarters in Heerbrugg, Switzerland and North American headquarters in Wyomissing, PA, SFS intec's Dekfast™family of fastening solutions addresses low slope market needs.
Tecta America Kentucky is excited to announce the addition of infrared roof scanning to our list of capabilities. The ability to perform these scans will be a great service for our roofing and roof maintenance customers throughout the Louisville and Lexington areas. Infrared moisture surveys offer a non-destructive way to determine potential moisture levels within a roof assembly.
Tecta America Kentucky opened in 2005 and has rapidly expanded to employ multiple roofing, sheet metal, and service crews while maintaining a high standard of workmanship and customer service. In 2010, we expanded our operations into two neighboring office and warehouse spaces. The additional space allowed for expanded service offerings in all departments and created room for continued growth.
We have worked on major commercial roofing projects across all of Kentucky, southern Indiana, and Ohio.
Tom Miller, President
Tom joined Tecta in 2005 when it expanded its operations into the Louisville area. As President he is responsible for the day-to-day operations and profitability of the Louisville office. Mr. Miller has worked in the commercial and industrial roofing and sheet metal industry for over 30 years. During this period he has served 2 terms on the National Roofing Contractors Association board of directors, is past president of the Louisville Builders Exchange, past Midwest Roofing Contractors Association board of directors and has held various other industry positions. Before joining Tecta America, Tom had been Division President and later Company President of a national roofing and sheet metal company with multiple branch offices.
Robert Bowling, Vice President, Senior Project Manager
Robert is a third generation roofing contractor with over 30 years experience in the Louisville commercial roofing industry. He joined Tecta in October 2004 and has estimated and managed our major projects to successful completions. Mr. Bowling's extensive knowledge of roofing systems and his understanding of where they perform best is instrumental in his ability to recommend the right roof for each of our customers.
Pat Dorsey, Project ManagerPat joined the company in 2008 after working for several years in the metal roofing industry in Louisville. Pat gained much of his roofing experience early on by working for commercial roofing companies during the summers throughout high school and college. Along with being a project manager, Pat has become the green roofing specialist for the office and is a sheet metal estimator. Pat is currently serving on the board of directors for the Kentucky Roofing Contractors Association.
Adam Paris, Vice President, Director of Business Development
Adam joined Tecta in November 2005 as service and Maintenance Manager for our Louisville office after having worked for the local branch of a national roofing contractor. Mr. Paris started his career in the roofing industry in 1999 as a laborer installing single ply roof systems. He has experience as an inspector and estimator on all types of roofing systems. Adam has a Bachelor's Degree and Supervision Certificate from Indiana University. His high energy and desire to provide exceptional service to every customer has allowed us to build this department and attract new customers over a short period of time in a very competitive market. Adam is currently serving on the board of directors for the Midwest Roofing Contractors Association.
Anthony Bryant, Commercial Superintendent
Anthony came to Tecta America in February of 2005 as a commercial field superintendent. Before joining the company he had worked in the Louisville roofing industry for over 15 years with Roofers Local 147 as a journeyman and later as a foreman. Tony has successfully installed some of the most difficult projects in the Louisville area and is proficient with all types of roofing systems and most manufacturers' specifications. His attention to safety and organization at the job site is a critical element to the success of the project.
Resa Coartney, Service Manager
Resa joined Tecta in 2007 as an administrative assistant and then worked with Adam Paris to build a full time service and maintenance department. In January of 2012, Resa was promoted to Service Manager. She is a graduate of Indiana University and has over 25 years of management experience in the manufacturing and construction industries. After college, Resa worked for her family owned industrial packaging business for 13 year in Office Management, Human Resources, Estimating and as Purchasing Manager. Then, in 1997 with her husband Bob, started a building contractor firm that specializes in historic renovation.
Tecta America is certified by every major manufacturer.