There are a wide range of roofing systems and materials from which to choose. The right solution for your facility will depend on the specific needs and budgets for that facility as well as the owner’s or user’s expectations for performance Because Tecta America is certified with every major roofing manufacturer, we can work with you to select the absolute best roofing system to meet the goals of your facility. We have the expertise and experience to tailor a roofing solution to the specific needs of your facility no matter the size or complexity.
Architectural Sheet Metal
Architectural sheet metal is the custom fabrication of metal flashings, trim, and sometimes ornate metals utilizing a multitude of materials. The metal types utilized range from conventional metals like steel and aluminum to high end materials like zinc, copper, lead, and metals with custom colored finishes.
The built-up roofing system is compiled from multiple layers of roofing plies (typically 2 to 4) adhered with adhesive or hot asphalt. The roof system is usually surfaced with a gravel layer embedded in hot asphalt or adhesive but can also be surfaced with a granulized cap sheet or coating. It can be installed over a multitude of roof decks and insulations.
Roof coatings are typically used in a restorative capacity to prolong the lifespan of an existing roof. Roof coatings can be installed over existing modified bitumen roofing systems, built-up roofing, metal roofing, and spray foam roofing. Multi-year manufacturer warranties also are commonly available.
Lightweight Concrete Deck
Lightweight insulating concrete (LWIC) is utilized on new and existing facilities as a new substrate for the roofing system. LWIC can be utilized to provide additional insulation to the building envelope and provide positive drainage for the roof. These roof decks are often very advantageous for owners or designers who are considering the sustainability and life cycle cost of a facility.
Metal roofing systems typically consist of concealed or exposed fastener systems, and rely on concealed metal clips attached to the structure, with the majority of the attachment hidden from view. Metal roofing systems have matching metal trim and flashings. These systems one of the longest lasting roof systems available when properly designed and installed.
Modified bitumen roofing systems are multi-ply systems usually consisting of 2-3 layers of a composite roll and surfaced with granules or foils. These systems are typically utilized on low slope roof areas in conjunction with varying insulations and deck systems, but are sometimes installed on steep slope substrates.
Single ply roofing systems are one layer of roofing membrane over various cover boards, insulation, and roof decks. Some common single ply roofing systems are TPO, PVC, and EPDM materials. Typical installation methods include mechanically attached, fully adhered, or ballasted.
Steep Slope Roof
Steep-slope roofing is typically considered to be any roof system which has a slope equal to or greater than 3:12 (though in some cases, it is defined as any slope >2:12). Some of these roof systems can be asphalt shingles, wood or cedar shakes and shingles, clay or concrete tile, or various metal or synthetic systems.
Tapered Insulation Systems
The system is an assembly of roof insulation that is sloped to provide primary slope on a roof deck where the existing roof deck does not provide adequate drainage. Slopes typically range from ¼” per foot to ½” per foot. It is utilized on several different roof decks and under most any low slope roofing system.
The process of removing the existing roof system, repairing any damaged substrate and installing a new roof system; also known as "reroofing" and “tear-off and replacement”.
The construction of a roof system on a new building or building addition. New construction roof systems do not involve the removal, recover or replacement of an existing system.
Repair and Maintenance
Extreme weather, including tornadoes, hail, heavy snow, downed trees, even seasonal freeze and thaw cycles can damage your roof and lead to leaks.
A maintenance plan to help avoid unexpected budget and roofing issues, facility downtime and premature roof failure or replacement.
Roof Asset Management
Tecta’s dynamic asset management software system offers facilities managers a powerful tool to plan, budget, manage, and optimize their roofing portfolio.
Emergency nationwide crews are here 24/7 to inspect the roof, assess the condition and begin making temporary or permanent repairs.
Waterproofing systems are utilized to prevent the passage of water under hydrostatic conditions (where water is present).
Providing an immediate point of contact, professionals are available 24/7/365 – by phone, fax or email.
Cool roof surfaces can remain at markedly lower temperatures when exposed to solar heat compared to roofs constructed with traditional non-reflective roofing products. Tecta America professionals can help assess your needs depending on your building and its geographic location.
The practice of placing windows or other openings and reflective surfaces so that during the day natural light provides effective internal lighting. Particular attention is given to daylighting while designing a building when the aim is to maximize visual comfort or to reduce energy use.
Green or Vegetative Roofs are composed of several layers including an underlying waterproofing system, soil media and vegetation. Benefits of this system include: lower energy costs, LEED recognition, air quality, reduced storm water runoff, extended roof life.
A panel exposed to radiation from the sun is used to heat water or, when mounted with solar cells, to produce electricity direct, especially for powering instruments in satellites.